What Size Bearing Buddy Do I Need

• #two

Re: What size begetting buddy do I need?

Virtually gunkhole axle trailers use ane.980 hub grease cap or bearing buddy. Grease guns are messy in general. Some times it helps to agree the fitting on the gun tight to the plumbing equipment on the axle. Nevertheless they do make dissimilar size plumbing equipment for the gun but most of the time the fitting that came with the gun will fit your bearing buddy.

nimmor

Petty Officer 1st Form

• #4

Re: What size bearing buddy do I need?

Get a grease gun with the pistol grip trigger not the pump handle. It is a lot easier considering you tin can practice information technology i handed.

kamby

Picayune Officer 1st Class

• #6

Re: What size bearing buddy exercise I need?

http://world wide web.etrailer.com/pc-grease~L30416.htm

As well make sure your connections on the grease gun are tight and snug, these suckers leak dont know why. I have the 15 Harbour freight one and it works swell..

• #9

Re: What size begetting buddy do I need?

1.980 is normally the standard, but it differs from the size of the axle. What kind of trailer practice you have and do you know the axle size?

I thing I ran into is that one.980 isn't really 1.980. Since our asian friends have been making them, information technology's actually 1.987 causing the BB to fight going on the hub. I had to have information technology lathed downwards to normal size despite the box advertsing the standard 1.980 size.

kamby

Petty Officeholder 1st Grade

• #10

Re: What size bearing buddy do I need?

1.980 is usually the standard, but it differs from the size of the axle. What kind of trailer exercise you have and do you know the axle size?

One matter I ran into is that 1.980 isn't really one.980. Since our asian friends have been making them, information technology's actually 1.987 causing the BB to fight going on the hub. I had to have information technology lathed downward to normal size despite the box advertsing the standard 1.980 size.

I had a similar issue as u did, except mine was the grit caps were likewise modest and kept falling off the hub. Even the new ones that came with the beam and hubs. Theres a few crimson eyes bearing buddys on clearance at walamrt for 10bucks i might give them a attempt.

• #11

Re: What size bearing buddy practise I demand?

Hopefully related to this thread, Bearing Buddy recommends we use #2 grade lubricant, the stuff used for auto suspensions, and not to mix different grades.

kamby

Footling Officer 1st Form

• #12

Re: What size bearing buddy do I need?

NLGI #2 Grease is common. They say not to mix because the unlike grades accept dissimilar temperature ratings addictives. Stick with a Marine Bearings grease and you will be fine.

With semi trucks we utilize NLGI i grease for extreme pressure and temperature

What Size Bearing Buddy Do I Need,

Source: https://forums.iboats.com/threads/what-size-bearing-buddy-do-i-need.316355/

Posted by: mcgaughcaut1994.blogspot.com

Share this post